| 产品特性：加速度计 | 品牌：ADI亚德诺 | 型号：ADXL344ACCZ-RL |
| 传感器类型：MEMS加速度计 | 传感轴：3轴 | 加速度范围：±2g、±4g、±8g、±16g |
| 精度：1mg/LSB | 输出类型：数字 | 系列：ADXL344ACCZ-RL |
| 电源电压：3.3V | 特性：ADXL344ACCZ-RL | 工作温度：105℃ |
| 封装/外壳：ADXL344ACCZ-RL | 安装类型：ADXL344ACCZ-RL | 最小包装数：ADXL344ACCZ-RL |
| 应用领域：测量仪器 |
The ADXL344 is a versatile 3-axis, digital-output, low g MEMS accelerometer. Selectable measurement range and bandwidth and configurable, built-in motion detection make it suitable for sensing acceleration in a wide variety of applications. Robustness to 10,000 g/of shock and a wide temperature range (?40°C to +85°C) enable use of the accelerometer even in harsh environments.
The ADXL344 measures acceleration with high resolution (13-bit) measurement at up to ±16 g/. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL344 can measure the static acceleration of gravity in tilt-sensing appli-cations, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°.
Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. Orientation detection reports four- and six-position orientation and can trigger an interrupt upon change in orientation. These functions can be mapped individually to either of two interrupt output pins.
An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption.
The ADXL344 is supplied in a small, thin, 3 mm × 3 mm × 0.95 mm, 16-terminal, plastic package.
APPLICATIONS
Handsets
Gaming and pointing devices
Personal navigation devices
Hard disk drive (HDD) protection
10至13位分辨率的多用途加速度计，适用于各种不同的应用
可通过SPI（3和4线）和 I2C访问数字输出
内置运动检测功能使得单振、双振、活动、非活动、方向和自由落体检测都可忽略不计
用户可调阈值
中断可独立映射至两个中断引脚
低至23 μA的低功耗运行及嵌入式FIFO，可降低整体系统功耗
宽电源和I/O电压范围：1.7 V至2.75 V
宽工作温度范围（?40°C至+85°C）
抗冲击能力：10,000 g
小型、超薄、无铅、符合RoHS标准、3 mm × 3 mm × 0.95 mm LGA封装
ADI公司的加速度计和iSensor? MEMS加速度计子系统能够在注重性能的应用中***可靠地检测和测量加速度、倾斜、冲击和振动。我们产品系列在功率、噪声、带宽和温度规格方面处于******，提供一系列MEMS传感器和信号调理片内集成。我们基于MEMS的Circuits from the Lab?参考设计由ADI专家构造和测试，可帮助您迅速启动下一个系统设计。
